Thule 9028XT - Stinger Installation

506-7077
S
TINGER INS
TALLATION / FOR 2" INSTALLATION
- A. Slide A
dapt
er Sleeve onto stinger - align holes in adapter with holes
in s
tinger
.
- B. Secure A
dapter with M6 Flat Head Screw and Hex Key.
- C. Slide stinger int
o receiver until hole in stinger aligns with hole in receiver.
Secure in position with M12 r
eceiver bolt, M12 lock washer and M12 flat
washer as illustrated. Firmly tighten using Thule tool.
STINGER INS
TALLATION / FOR 1-1/4" INSTALLATION
- Slide stinger int
o receiver until hole in stinger aligns with hole in receiver.
Secure in position with M12 r
eceiver bolt, M12 lock washer
and M12 flat washer as illustrated. Firmly tighten using Thule tool.
A
B
C
2