Thule coaster xt - Removing Carrier from Bicycle; Strolling Setup and Usage; Adjusting Hitch Arm for Strolling

51100985 - B
15
4.9.1 ADJUSTING THE HITCH ARM FOR
STROLLING
A. Slide the hitch arm inwards until the front hole on the
hitch arm aligns with the hole in the wing.
(See image 2)
B. Insert the safety pin through the back of the wing and
through the hitch arm and close the D-clip.
(See image 3)
C. Verify that the hitch arm is securely attached to the
Thule child carrier by giving it a sharp pull away from
the Thule child carrier.
4.8.6 REMOVING THE CARRIER FROM
YOUR BICYCLE
A. Unlatch the back-up safety strap from the bicycle frame.
(See image 1)
B. Pull the rubber tab off of the end of the security pin.
C. Pull the security pin up out of the ezHitch™.
D. Pull the hitch ball forward out of the ezHitch™.
4.9 strollInG
1
2
3