Thule Glide - Installing the Thule Glide Wheels

10
51100988 - A
3.4 InStallInG the WheelS
1
WARNING
Beforeeachjourneymakesurethat
bothofthewheelsaresecurelylocked
inthecarrieraxle.
A. Pressandholdthewheelreleasebuttononthe
wheel.(Seeimage1)
B. Insertthewheelaxleintothecarrieraxle.
C. Releasethewheelreleasebutton.
D. Pressthewheelfullyintothecarrieraxle.
E. Verifythatthewheelissecurelyattachedtothe
carrierbygivingitasharppull.
F. Repeatfortheotherwheel.
G. Usingatirepressuregaugechecktheairpressure
ineachtire.Theminimumrecommendedtire
pressureis20psi(1.4bar)andthemaximumis25
psi(1.7bar).Ifairpressureistoolowineitheroneof
thetiresllthemupusingabicycletirepump.
3.5 removInG the WheelS
2
A. Pressandholdthewheelreleasebuttononawheel.
(Seeimage2)
B. Pullthewheeloutofthecarrieraxle.
C. Repeatfortheotherwheel.