Thule Hullavator 898 User Manual

506-7063_01 1 of 17
EN = North American English / ES = Latin American Spanish / FR = Canadian French / PT = Brazilian Portuguese
EN PARTS INCLUDED / ES PIEZAS INCLUIDAS / FR PIÈCES INCLUSES / PT PEÇAS INCLUSAS
HULLAVATOR
™
898
A
W X
E
I
Q
Y Z AA BB CC DD
S T V
R U
J K L M N O P
F G H
C D
B

Thule Hullavator 898 Specifications

General

Type	Kayak carrier
Model	898
Fits Thule WingBar Evo	Yes
Fits Thule SquareBar	Yes
Fits Thule SlideBar	Yes
Fits Thule ProBar Evo	Yes
Rubber protection	Yes
Features	Lift assist
Material	Aluminum, plastic

Summary

Warnings and Limitations

Load Bar Spacing and Clearance Requirements

Load bars must be at least 24" (610mm) apart for safe use.

Preventing Boat Contact During Loading/Unloading

Bow and Stern Tie-Down Instructions

Always tie down bow and stern of boat to vehicle bumpers or tow hooks.

Rack and Vehicle Weight Limitations

Do not exceed weight limitation of rack. Vehicle must carry 130lbs total roof load.

Installing Bar Mounts to Square Bars

Load Bar Spacing and Parallelism

Installing Bar Mounts to Square Bars (continued)

Install Angled End Cap

Attach Bar Mount to Load Bar

Insert and Position Pivot Pin

Installing Bar Mounts to T-Track Bars

Insert and Secure Bracket for T-Track

Installing Bar Mounts to T-Track Bars (continued)

Align and Tighten T-Track Bar Mount

Installing Cradles

Slide Plates and Attach Top Cradle

Attach Bottom Cradle and Position Cradles

Final Carrier Assembly

Place and Secure Arm Assembly

Close and Latch Arm Assembly

Final Carrier Assembly (continued)

Vehicle and Arm Clearance Checks

Mounting the Kayak

Unlock and Extend Carrier Mechanism

Mounting the Kayak (continued)

Lift and Position Kayak in Cradles

Lift and load kayak into lower cradles, positioning it evenly for stability.

Adjust Upper Arm Position for Snug Fit

Loosen knob on upper arm and adjust position for a snug fit against kayak.

Securing the Kayak

Secure Kayak with Load Straps and Bumpers

Use load straps to secure kayak to cradle loops and slide buckle bumpers.

Ensure Proper Load Strap Placement

Lifting Kayak to Final Position

Lift Kayak and Activate Hullavator

Squeeze handles to lift kayak straight up; stand up to activate Hullavator.

Rotate Arms and Lock Carrier into Position

Rotate arms onto bar mount and ensure carrier locks with an audible click.

Securing Kayak with Tie Downs

Use Bow and Stern Tie Downs

Bow and stern tie downs must be used to prevent loss of kayak/rack.

Thread Rope Through Ratchet Carabineer

Securing Kayak with Tie Downs (continued)

Attach Tie Downs and Ratcheting Carabineer

Attach bow/stern tie downs and ratcheting carabineer with rope to kayak/vehicle.

Thule Rack Guidelines

Fit Guide and Accessory Recommendations

Load Capacity and Vehicle Precautions

Adhere to load capacity limits and be aware of vehicle/cargo precautions.

Security, Maintenance, and Driving Safety