Need help?Do you have a question about the Thule RideOn 9502 and is the answer not in the manual?
General| Mounting | Towbar |
|---|---|
| Capacity | 2 bikes |
| Rear lights | No |
| One Key System compatible | No |
| Tilt function with bikes | Yes |
| Bike lockable to carrier | Yes |
| Carrier lockable to car | Yes |
| Foldable | Yes |
| Material | Steel and plastic |
| Type | Towbar mounted bike carrier |
| Wheel mounting | Adjustable wheel straps |
| Compatibility | Fits most bikes with a frame diameter of 22-80 mm |
| Power connector | No |
Details compliance with ISO norm and maximum load limits for bikes and towball.
Important reminder regarding the vehicle's towball load capacity.
Instruction to fit screws loosely initially, tightening at the end of the procedure.
Assemble initial components loosely as per step 1.
Assemble the main frame parts, including support arms, using provided hardware.
Attach securing mechanisms and wheel holders to the frame.
Install the main support arms and connect the lighting system.
Securely tighten all fasteners and mount the carrier onto the towball.
Load bicycles onto the carrier and secure them using the straps.
Connect the electrical system and adjust the license plate holder.
Optional accessories for securing the carrier and mounting it on a wall.
Accessory for displaying temporary license plates.
Accessories for brake lights and converting electrical pin connectors.
System for unifying locks across multiple Thule products.
To Next Page