Need help?Do you have a question about the Thule XSPORTER PRO and is the answer not in the manual?
General| Material | Aluminum |
|---|---|
| Adjustable Height | Yes |
| Compatibility | Most pickup trucks |
| Warranty | Limited Lifetime Warranty |
| Installation | no-drill installation with included tools |
Comprehensive listing of all parts, part numbers, quantities, and product registration information.
Securing the saddles (B) to the tops of the uprights (C) using flat head cap screws (A).
Attaching base assemblies (E/F/G/H) and securing saddles (B) to crossbars (J) with specified hardware.
Adding T-slides (N) to clamps (L) using socket head cap screws (M) and securing them.
Placing the front crossbar assembly and shims (P) onto the vehicle's bedrails.
Attaching clamp feet (Q) and tightening clamp bolts to the specified torque.
Placing the rear crossbar assembly and ensuring uprights are at 90 degrees.
Pre-assembling and installing load stops (AA, BB, CC, DD) onto the crossbars.
Inserting end caps (R) and optional rubber strips (T) into the crossbar ends.
Installing lock cylinders (V) and lock plugs (Y) into upright end caps (U).
Securing locking clamp covers (Z) onto clamps equipped with T-slides.
Essential guidelines for safe operation, load limits, and maintaining the rack system.
Details on warranty coverage, exclusions, and the disclaimer of liability.
To Next Page