Need help?Do you have a question about the Thump th-15a and is the answer not in the manual?
Configures initial parameters like level and EQ bypass before powering on.
Details on connecting signal sources and power to the TH-15A.
Steps for turning the unit on and adjusting initial volume levels.
Background on TAPCO's legacy and the design principles of the TH-15A.
Highlights of the TH-15A's acoustic, amplification, and construction attributes.
Description of female XLR input and male XLR output connectors for signal routing.
Explanation of the LEVEL control and OL (overload) indicator on the rear panel.
Details on HIGH EQ, MID EQ, MID FREQ, LOW EQ, and the DIRECT/EQ switch.
Information on the power switch and the IEC line cord socket for AC power connection.
Details on over-excursion, thermal, and driver protection mechanisms.
Guidance on using high-quality, shielded cables for audio input.
Instructions on positioning the loudspeaker for optimal use, including pole-mounting.
Guides users through diagnosing and resolving common problems like no power or sound.
Step-by-step instructions for safely removing and replacing the unit's fuse.
Instructions for obtaining factory-authorized service and preparing the unit for repair.
Diagram and explanation of balanced XLR connector wiring for audio signals.
Comprehensive list of acoustic, electrical, power, and physical specifications for the TH-15A.
General| Power Output | 1300W |
|---|---|
| Frequency Response | 32 Hz - 23 kHz |
| Type | Powered Loudspeaker |
| Crossover Frequency | 2 kHz |
| Enclosure Material | Polypropylene |
| Outputs | XLR |
| Weight | 15.8 kg (34.8 lbs) |
| Mounting Options | Pole mount |
| Driver Size | 15" Woofer, 1.4" Compression Driver |
To Next Page
