Product Features
Thumper operates with ordinary 120 volt household
current. (230/240 Volt model available — contact
Thumper Massager Inc. for availability.)
If the external surfaces become soiled, wipe clean with a
cloth dampened with a mild cleanser. Do not use
thinner, benzene, or any other solvents. Thumper is
maintenance free, constructed with permanently
lubricated sealed ball bearings. No additional lubrication
is necessary. Thumper has no user serviceable parts
inside.
With extended use it is normal for the housing to get
warm. If temperatures exceed normal limits (such as
when ventilation holes are blocked), a thermal breaker
will shut off the power, resetting itself when cooled. It is
recommended Thumper be used 20 minutes on / 20
minutes off to allow the unit to cool down, preventing
overheating and shut off.
To reduce the risk of electric shock, Thumper has a
polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a
proper outlet. Do not change the plug in any way.
weight: 7 lbs (3.2 kg)
dimensions: 10"L x 5.5"W x 7.5"H (20 cm x 25 cm x 19 cm)
volts: 120 V North America; 230 V Europe
amps: 0.7 A North America; 0.4 A Europe
frequency: 60 Hz North America; 50 Hz Europe
speed impact: 1200 rpm to 2100 rpm
(20 to 35 pulses per second)
from low to high
Power Supply
Maintenance
Operation
Specifications
12
2165 Thumper Maxi2.qxp:947558.qxd 1/13/11 3:21 PM Page 14
To Next Page
Loading...