Thunder Multi-Function Jump Starter User Manual

3
PRODUCT LAYOUT
OPERATION
Product Layout & Operation
Thank you for choosing the Thunder Multi-Function Jump Starter.
Always follow basic safety precautions when using electrical appliances.
Read all instructions carefully.
Please keep this instruction manual for easy reference.
Indicator LEDs
Press the switch to check the storage level of your Thunder Multi-Function Jump Starter. The indicator LEDs will flash one by one during charging.
Each indicator shows level of charge.
Thunder Jump Starter Charging Instruction
1. Plug small plug of the 240 Volt lead into the Thunder Jump Starter. 1. Plug the small plug of the car charger into the Thunder Jump Starter.
2. Plug the charger into a suitable 240 Volt outlet. 2. Plug the car adaptor into the socket of cigarette lighter.
Jump Start Socket
USB 5 Volt 2 Amp Output Port
USB 5 Volt 1 Amp Output Port
LED Flash Light
Indicator
12 Volt 10 Amp Output Port
19 Volt 3.5 Amp Output Port
14 Volt 1 Amp Input Port
ON / OFF Switch
14 Volt
1 Amp
Input Port
Home Adaptor
Car Adaptor
19 Volt
3.5 Amp
Output Port
USB 5 Volt
2 Amp
Output Port
For 12 Volt
Vehicle Products
12 Volt
10 Amp
Output Port
Jump Start
Socket
Jumper Cable
with Clamps
Test
Indicator Light
Indicator Unlit 5 Flashing 1 Solid 3 Solid 4 Solid
0%
5 Solid
Storage Level
2 Solid
10% 20% 40% 60% 80% 100%
OR

Thunder Multi-Function Jump Starter Specifications

General

Brand	Thunder
Model	Multi-Function Jump Starter
Category	Remote Starter
Language	English