Page 6 For technical questions, please call 1-888-866-5797. Item 57325
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Note: Performance of the Solar Panels will vary dependent on site location, angle
of the panels in relation to the arc of the sun, and available sunlight.
Operation
1. Use the J-Plug Cable on the back of the Solar
Panel to connect to an appropriate 12VDC
Charge Controller (sold separately).
J-Plug Cable
Note: Solar Panel shown in temporary
setup with stands pulled out.
2. Angle the solar panel towards the sun. Turn
it southward for the northern hemisphere.
3. If setting up the Solar Panel temporarily and
charging is complete, disconnect the Solar
Panel output. Store Solar Panel in a dry,
indoor area out of reach of children.
To Next Page
Loading...