- 7 -
Controls and operation
Charging the Battery
1) Plug the supplied USB lead into the supplied mains adaptor (or suitable USB charger
capable of supplying at least 1000mA at 5v DC).
2) Plug the small USB-C end into the charging socket on the side of the radio (22).
3) The charging indicator on top of the radio will light red, and if the radio is powered on the
battery indicator on the screen will also show that the battery is charging.
4) To charge the battery fully will take approximately 3 - 4 hours and when the battery
charging process is complete the indicator will go off to conrm the battery is fully charged.
Please Note: The battery can also be charged by using the optional 12v T-X Vehicle Kit or 12v/24v
Vehicle USB adaptor.
Mains USB Adaptor Input: 240v AC - Output: 5v DC @ 1000mA
Vehicle USB Adaptor Input: 12 - 24v DC - Output: 5v DC @ 1000mA
Vehicle Kit Input: 12v DC Only
BATTERY INFORMATION!
• Do not dispose of battery in re, also keep the battery away from re
• Never attempt to disassemble the battery pack
• Do not directly connect (shortcircuit) the positive and negative terminals
• Only use suitable charger
To Next Page
Loading...