3.2.2 Call-and-park control stations
Use the call-and-park control stations to move the stairlift while you are not seated in the
chair. The call-and-park control stations are located at the top and the bottom of the
stairs. As an option, the call-and-park control stations can also be located at
intermediate floors with a parking point.
17. Call-and-park control station
18. Call button
- Push and hold the button to move the
stairlift to you.
- After the stairlift stops, release the
button.
19. Park button
- Push and hold the button to move the
stairlift to the nearest parking point.
- After the stairlift stops, release the
button.
20. Automatic seat folding button (optional)
- Press and hold the button for 1 sec. to
fold or unfold the seat.
21. Status indicator
- The status indicator shows the status of the stairlift.
See chapter 6 “Signals”.
CAUTION
When the key lock is active the lift can still be operated via the call and park
units.
NOTE
The stairlift will not move with the call-and-park-control stations if the
emergency stop button is activated. The joystick user interface has priority over
the call-and-park control stations.
21
18
19
20
17
Description 9
To Next Page
Loading...
