4.5.2 Disconnecting
1.
4-7 s
1. Press the yellow alarm button for 4 to 7 seconds. The light on the alarm button
turns off.
The call has now ended. It is also possible for the person being called to hang up.
4.5.3 Choosing the next number
1.
1 s
If the connection to the first contact does not succeed, you can choose to go to the next
pre-programmed number. This is done as follows:
1. During the call, press the yellow alarm button once briefly. The next number will
now be dialed.
NOTE
If the contact’s number redirects to voice mail, you must also briefly press the
yellow alarm button once to call the next number.
Use 31