setting mode, joystick up or down to select the camera's zoom speed to be set to "low",
"medium", "high speed".
E. Day and night conversion
Move the cursor to "transform day and night", converted as the Aperture open access day
and night setting modes, joystick up or down to select the camera for day and night mode
to be set to "auto", "color", "black and white".
F． Camera Restart
Select camera factory-set to "open", the system will restore the camera parameters to
factory settings.
G． Advanced
A1
B1
C1
ADVANCED
-------------------------------------------
<WB Settings>
<Exposure Settings>
<Special Settings>
<Aperture Settings>
<Others>
Back
Exit
CAMERA SETTINGS
-------------------------------------------
Focus Mode ：Auto
Digital Zoom ：OFF
Backlight ：OFF
Image Freeze ：OFF
Zoom Speed ：Middle
Day Night ：Auto
Camera Reset ：OFF
<Advanced>
Back
Exit
D1
E1
A1. white balance mode
Move the cursor to "white balance mode", press the aperture opening into white balance
setting mode, rocker bottom can be set to "auto/manual".
When the white balance mode to manual when the r, b gain value can be adjusted: move
the cursor to "r gain" by IRIS on entering r-gain setting mode, rocker set r-gain value.
Move the cursor to "b gain" by IRIS on entering the b gain settings mode, rocker sets b
gain value.
To Next Page
Loading...
