Caution!
Before driving, be sure to check the folding part, the handle part and the part where the
main fixing part of the product are fastened well. And check the position of folding part
fixing status.
Throttle malfunction caution
Regardless of whether the throttle is operated or not, the motor sensor may continue to
operate, causing malfunctions such as sudden acceleration. In this case, holding the
brake lever to cancel the operation. This phenomenon may be caused by corrosion of
the throttle, immersion of the throttle, disconnection of the magnet, broken off levers,
and broken spring. Do not bounce the throttle lever strongly.
6)
How to stop
Attention to using the brake gently first, don't brake suddenly .When you brake gently,
the ABS function started. This will be very effective in reducing speed. After the speed
dropped, the brakes are finally applied to stop the scooter.
Tip
：
：：
：
Check for safe braking
*For safe braking, check whether the brake lever and drum brake connection are damaged
before and after driving (wire damage, external breakage, etc.). And check brake wear and
looseness of brake inner core (inner wire). In the case of hydraulic brakes it is also necessary
to check the oil leakage or deficiency and always check that the braking force is sufficient.
*Due to various factors such as road surface condition and speed, the brake can’t stop the
scooter as expected. The electric ABS function is an auxiliary function to further increase the
braking force. The user should understand the electric ABS and consider the braking time when
riding.
7
To Next Page
Loading...