What to do if my Tibo TI435 DAB has no sound?
If your Tibo Radio is producing no sound, there are several potential causes. First, check that the volume control isn't at its lowest level; use the remote or the amplifier to increase the volume. Also, ensure the RCA cable is properly inserted. Finally, the aerial may not be picking up a signal, so try moving the aerial to improve the connection.
How to fix a Tibo TI435 DAB with no power?
If your Tibo Radio has no power, make sure the power switch is turned on. Also, check that the power cord is properly connected and readjust it if necessary.
What to do if Tibo TI435 DAB suddenly has no sound?
If your Tibo Radio suddenly stops producing sound during operation, it might have entered overheat protection mode; leave the tuner for a while to cool down. Also, check that the RCA lead is properly connected. Finally, ensure the aerial hasn't moved or become disconnected; readjust or reconnect it if needed.
Why does my Tibo TI435 DAB have bad or distorted sound?
If your Tibo Radio's sound is bad or distorted, it could be due to an audio source problem. In this case, perform a factory reset. It may also be caused by a bad or no signal from the aerial, so try readjusting the aerial.
To Next Page
General