④If the OR code network configuration is unsuccessful, try to use the
AP network configuration(the mobile phone can be automatically
added after connecting to the WiFi hotspot issued by the camera
and returning to the App)the password should not be set as
complicated as possible, and it does not contain special characters.
⑤If the two methods are still unable to connect to the Internet, it is
recommended to restart the router and try again
⑥Provide the nameplate label of the router.
8. TF card not recognized?
A: After inserting the TF card into the TF card slot of the camera,
check whether the capacity of the TF card is displayed in the
"System Settings" . "TF Card Recording Settings" of the device in the
APP. lf it prompts "No TF card detected", it means that the TF card
recognition failed.
①Please use brand TF card, Only FAT32 format is supported.
②The TF card can be recognized by the computer normally.
③The recommended TF card capacity is between 2-128G.
④Recommend to use a high-speed TF card of Class 4 and above.
⑤Try to insert and unplug the TF card several times.
⑥It is recommended to try another TF card.
⑦It may take some time for the camera to recognize the TF card.
After inserting the card, wait for about 30S before observing.
To Next Page
Loading...
Need help?
General
