Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@tigerlifting.com
www.tigerlifting.com
Page 15 of 38
Manual Tiger SS11-PLH En 201704 v3.2
7. Maintenance
Load Chain
To determine if load chain should be continued in service, check gauge lengths and condition. Chain worn beyond the
maximum allowable gauge length (as shown in Chapter 6), nicked, gouged or twisted chain should be replaced before
returning the lever hoist to service.
Never perform maintenance on the hoist while it is supporting a load.
Before performing maintenance attach a notice/tag to the hoist to indicate that it must not be used while maintenance is
in progress.
Servicing and repairs should only be carried out by qualified, competent, and responsible people.
After performing any maintenance to the hoist, always perform a functional test before returning to service. After the
replacement of components, a subsequent inspection by a competent person is obligatory!
Repair work may only be carried out by a specialist workshop that uses original Tiger spare parts.
Before handling lubricants, read the associated product health and safety data information sheet obtained from the
lubricant supplier.
To Next Page
Loading...
