Tiger SS11 - Exploded Diagrams

www.tigerlifting.com
Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@tigerlifting.com
www.tigerlifting.com
Page 29 of 38
Manual Tiger SS11-PLH En 201704 v3.2
13. Exploded diagrams
SS11 Subsea Lever Hoist
For 800kg, 1.5t, 3.0t, 6t and 10t capacity units:
Part No.
Part Name
Part No.
Part Name
Part No.
Part Name
S-01
Nut for Gear Cover
S-17
Change Gear
S-35
Guide Plate
S-02
Gear Cover
S-18
Spring Washer
S-36
Retaining Spring
S-03
Pinion Shaft
S-19
Screw for Handle
S-37
Screw for Guide Plate
S-04
Pinion Shaft Washer
S-20
Label
S-38
Switch Set for Free Wheel
S-05
Gear-side Plate
S-21
Pinion Gear
S-39
Pinion Nut
S-06
New Load Sheave
S-22
Load Gear
S-40
Bottom Hook Assembly
S-07
Top Hook Pin*
S-23
Travelling end stop
S-41
Bottom Hook Pin
S-08
Safety Latch Set
S-25
Chain Stripper
S-42
Nut for Pawl Spring
S-09
Top Hook Assembly
S-26
Load Chain Guide
S-43
Spring Stand
S-10
Disc Hub
S-27
Wheel-side Plate Assembly
S-44
Pushing Up Spring
S-11
Pawl Spring
S-28
Gasket
S-45
Pushing Up Pin
S-12
Brake Pawl
S-29
Ratchet Gear with Brake Disc
S-46
Change Pawl
S-13
Snap Ring for Pawl Pin (800kg/1.5t)
S-30
Nut for Handle Cover
S-47
Nut for Brake Pawl Pin
S-14
Spring Disc
S-31
Handle Assembly
S-48
Screw for Pawl Spring
S-15
Snap Ring for Pinion Shaft
S-32
Washer
S-49
Screw for Label
S-16
Brake Cover with Handle Cover
S-34
Grip Ring
S-52
Chain–End-Fixing Screw (6.0t/20t)
*S-07 Top Hook Pin is fixed to the S-27 Wheel-side Plate Assembly for 800kg and 1.5t capacity units.
6.0t top and bottom hook
10.0t top and bottom hook