Need help?Do you have a question about the TigerKing SF-2 and is the answer not in the manual?
Highlights the severe danger of carbon monoxide poisoning from direct burning heaters, requiring proper ventilation.
Provides essential safety instructions for moving the heater, emphasizing turning it off to avoid burns.
Explains the fuel delivery process from the tank to the nozzle via a solenoid pump and high pressure.
Details how the heater ignites fuel using a high-voltage spark from an igniter plug.
Describes the role of the fan in providing air for combustion and cooling the unit after shutdown.
Explains the function of the fuse in protecting the electric equipment from overvoltage.
Details the photoelectric tube that senses flame to ensure continuous combustion.
Describes the device that stops combustion if internal temperature exceeds safety limits.
Explains the sensor that monitors fuel level and stops operation to prevent issues from low fuel.
Instructions for unpacking and separating the handle from the heater.
Steps for securely fixing the handle using bolts and nuts as per the diagram.
Guide for attaching the heater to the wheel support frame using bolts, washers, and pins.
Procedure for assembling the guard onto the main body using M5X10 bolts.
Instructions for attaching the visor, heater interception, and heat umbrella to the main body.
Lists important precautions for fuel storage and usage to prevent hazards.
Strong warning against using volatile fuels like gasoline due to explosion risks.
Provides guidance on refueling, emphasizing outdoor operation and avoiding overfilling.
Critical warning against refueling an overheated or operating heater due to explosion risks.
Stresses the need for adequate ventilation, requiring a minimum open space per product unit.
Step-by-step guide for initial setup and operation of the heater.
Details the procedure for safely shutting down the heater, including fan cool-down.
Warns against unplugging the heater while the fan is cooling to prevent damage.
Crucial safety warning advising against maintenance on a hot or powered heater.
Instructions for cleaning the fuel tank every 200 hours or as needed.
Guidance on cleaning the injection and pump filters at least twice a year.
Instructions for cleaning the ventilating and cooling fan wings annually.
Instructions for cleaning the fan wings annually to ensure proper operation.
Step-by-step guide for preparing the heater for long-term storage, starting with opening the fuel cap.
Instructions on how to drain the fuel tank completely using a hose.
Details on cleaning the fuel tank using specific solvents, avoiding water to prevent rust.
Emphasizes the importance of thoroughly drying the fuel tank after cleaning.
Warning against storing the heater with fuel or for extended periods without proper preparation.
Guidance on storing the heater in a suitable environment to prevent damage.
Troubleshooting guide for issues indicated by the power lamp flickering, with specific reasons and solutions.
Diagnosing and resolving flame detection errors, including fuel shortage and tube issues.
Addresses issues related to imperfect combustion and flame detector contamination.
Troubleshooting temperature sensor errors, such as terminal issues or sensor inferiority.
Resolving overheating or conductive sensor errors, including abnormal overheating and inclination.
Troubleshooting float sensor issues like fuel shortage, indicating specific corrective actions.
To Next Page
General