Need help?Do you have a question about the TigerStop SawGear Touch and is the answer not in the manual?
Physical addresses for TigerStop global headquarters and European branches.
Phone numbers for customer service, sales, and regional support.
Email addresses for customer service, sales, and general inquiries.
Lists parts associated with the Power Head Touch component.
Details the components included in the Saw Gear Beam assembly.
Enlists the parts that constitute the Flip-Away Stop assembly.
Lists the different types of stops included in the inventory.
Details the components for the bench mount assembly.
Lists optional parts required for assembling the table.
Specifies the voltage and circuit breaker requirements for the SawGear Touch.
Step-by-step instructions for installing the SawGear table.
Instructions on how to attach the saw bracket to the table.
Details on securing the table to the saw bracket using hardware.
Guide for attaching the table legs to the assembly.
Instructions for mounting the SawGear using bench mount brackets.
Steps to securely fasten the SawGear into the bench mount brackets.
Procedures for safely removing the SawGear from its stand.
Steps to connect and secure the stop bar to the flip-away stop.
Initial setup procedure when powering on the SawGear Touch for the first time.
Steps to perform initial calibration for accurate measurements.
Overview of the main screen interface and its components.
Steps for normal power-on after initial setup.
Instructions for basic manual movement of the Stop.
How to perform movements for miter cuts based on angle.
Description of the main menu options and navigation.
Guide to navigating the Setup and My SawGear menu sections.
Setting that correlates motor rotation to distance traveled.
Selects whether the system operates in inches or millimeters.
Procedure for calibrating the system for accurate measurements.
Routine used at the factory for quality assurance.
Sets the minimum and maximum limits of the Stop's movement.
Finds a reference point to ensure accurate positioning.
Selects the mounting side (left/right) of the SawGear Touch.
Select a language for the SawGear Touch display.
Enables or disables optimization for stock usage.
Enables or disables printing of part length and quantity.
Sets the distance the Stop moves with each increment press.
Sets the width of the saw blade for accurate movement.
Sets which column in a CSV file contains part length information.
Sets which column in a CSV file contains part quantity information.
Enables or disables the visibility of the Unit Toggle on screen.
Manually sets the Stop's minimum distance from the saw.
Manually sets the Stop's maximum distance from the saw.
Determines the saw's true pivot point for accurate miter cuts.
Displays contact details for TigerStop Customer Service.
Shows the unique serial number of the SawGear Touch machine.
Displays the enable codes for activating SawGear Touch features.
Shows the current interface version and allows updates.
Displays the firmware version and allows updates.
Information about activating debug mode, requires contacting support.
Instructions for downloading compatible CSV part lists to the device.
Guide on how to manually create a new part list on the device.
Steps to modify existing part lists.
Procedure for removing a saved part list from the device.
Instructions for executing a saved part list for automated cutting.
How to run a part list to maximize stock usage.
Section to record critical settings like serial number and limits.
Daily maintenance tasks to be performed on the machine.
Monthly maintenance tasks for cleaning and upkeep.
Quarterly maintenance checks for specific components.
Detailed procedure for adjusting the scale for accurate movement.
Lists all the components included in the Printer Kit.
Instructions for setting up and operating the printer with SawGear Touch.
Step-by-step guide for assembling the printer stand.
Physical addresses for TigerStop global headquarters and European branches.
Phone numbers for customer service, sales, and regional support.
Email addresses for customer service, sales, and general inquiries.
Lists parts associated with the Power Head Touch component.
Details the components included in the Saw Gear Beam assembly.
Enlists the parts that constitute the Flip-Away Stop assembly.
Lists the different types of stops included in the inventory.
Details the components for the bench mount assembly.
Lists optional parts required for assembling the table.
Specifies the voltage and circuit breaker requirements for the SawGear Touch.
Step-by-step instructions for installing the SawGear table.
Instructions on how to attach the saw bracket to the table.
Details on securing the table to the saw bracket using hardware.
Guide for attaching the table legs to the assembly.
Instructions for mounting the SawGear using bench mount brackets.
Steps to securely fasten the SawGear into the bench mount brackets.
Procedures for safely removing the SawGear from its stand.
Steps to connect and secure the stop bar to the flip-away stop.
Initial setup procedure when powering on the SawGear Touch for the first time.
Steps to perform initial calibration for accurate measurements.
Overview of the main screen interface and its components.
Steps for normal power-on after initial setup.
Instructions for basic manual movement of the Stop.
How to perform movements for miter cuts based on angle.
Description of the main menu options and navigation.
Guide to navigating the Setup and My SawGear menu sections.
Setting that correlates motor rotation to distance traveled.
Selects whether the system operates in inches or millimeters.
Procedure for calibrating the system for accurate measurements.
Routine used at the factory for quality assurance.
Sets the minimum and maximum limits of the Stop's movement.
Finds a reference point to ensure accurate positioning.
Selects the mounting side (left/right) of the SawGear Touch.
Select a language for the SawGear Touch display.
Enables or disables optimization for stock usage.
Enables or disables printing of part length and quantity.
Sets the distance the Stop moves with each increment press.
Sets the width of the saw blade for accurate movement.
Sets which column in a CSV file contains part length information.
Sets which column in a CSV file contains part quantity information.
Enables or disables the visibility of the Unit Toggle on screen.
Manually sets the Stop's minimum distance from the saw.
Manually sets the Stop's maximum distance from the saw.
Determines the saw's true pivot point for accurate miter cuts.
Displays contact details for TigerStop Customer Service.
Shows the unique serial number of the SawGear Touch machine.
Displays the enable codes for activating SawGear Touch features.
Shows the current interface version and allows updates.
Displays the firmware version and allows updates.
Information about activating debug mode, requires contacting support.
Instructions for downloading compatible CSV part lists to the device.
Guide on how to manually create a new part list on the device.
Steps to modify existing part lists.
Procedure for removing a saved part list from the device.
Instructions for executing a saved part list for automated cutting.
How to run a part list to maximize stock usage.
Section to record critical settings like serial number and limits.
Daily maintenance tasks to be performed on the machine.
Monthly maintenance tasks for cleaning and upkeep.
Quarterly maintenance checks for specific components.
Detailed procedure for adjusting the scale for accurate movement.
Lists all the components included in the Printer Kit.
Instructions for setting up and operating the printer with SawGear Touch.
Step-by-step guide for assembling the printer stand.
General| Brand | TigerStop |
|---|---|
| Model | SawGear Touch |
| Category | Control Systems |
| Language | English |
To Next Page
