6
TIKE TECH USER INSTRUCTIONS
Warning: Before folding always remove your passenger/child.
TO FOLD YOUR TIKE TECH SINGLE/DOUBLE STROLLER
• Put seat/seats in the open/recline position.
• Stand behind the stroller (make sure the back parking brake is engaged or locked) & place your index finger through the holes on the
left & right side pull latches. (see diagram A)
• Then, pull the latches up or back towards the handle bar.
• This will release the internal locking mechanism and allow for easy folding of your tike tech.
• After the internal locking mechanism is released, you will be able to simply fold your stroller together. (see
diagram C)
Note: For a flat fold, remove all the wheels. (see
diagram D)
TO OPEN STROLLER
• simply push apart until the internal locking mechanism locks/snaps in place preventing the stroller from folding.
Note: Make sure the stroller cannot fold or that the internal locking mechanism (left & right side) lock has snapped in place before
using. You can check by simply pushing down on the handle bar to see if the stroller folds. It should not fold unless you pull back on
the pull latches.
ADDING SAFETY BAR
ADJUSTABLE HANDLE BAR
(SINGLE ONLY) & SAFETY BAR
• To adjust simply push on both Circular Lock buttons &
adjust to your desired position.
(see diagram)
>>
>>
>>
>>
Take the safety bar and slide into the holding latch
(see diagram). When sliding the role bar in the latch,
press on the circled buttons. When removing the role
bar, press on the circled buttons.
(see diagram)
Note: the safety bar is only for added safety &
convenience. Always strap your child in with all seat
belts & straps securely tightened.
A B C D
pull back
To Next Page
Loading...