TIL TDFM-136B User Manual

TDFM-136B
VHF/FM DIGITAL AIRBORNE TRANSCEIVER
OPERATING INSTRUCTIONS
Til Document: 08RE399
Rev. N/C
OCT 2010
Tec h n i s o n i c Indust r i e s L i m i t ed.
copyright © 2010 Technisonic Industries Ltd. All rights reserved.

TIL TDFM-136B Specifications

General

Brand	TIL
Model	TDFM-136B
Category	Transceiver
Language	English

Summary

Contact Us

Scope of Manual

FCC Compliance Information

Warranty Information

Section 1 Introduction

1.1 Controls and Display

Describes the front panel controls and display information for the transceiver.

1.2 Transceiver Basic Operation

Covers fundamental transceiver operation procedures.

1.3 About Commands

Provides an overview of the transceiver's command architecture and levels.

Section 2 Transceiver Operation

2.1 Channel Operating Parameters

Details the parameters for Main and Guard channels and their memory settings.

2.2 Editing Channel Operating Parameters

Explains how to edit channel operating parameters via the front panel or PC software.

2.3 Scan and Multi-Mode Operation

Covers scan and multi-mode operations.

2.4 Controlling User Access

Details methods for controlling user access to features and settings.

2.5 Encrypted Operation

Covers the process of using encryption features.

Section 3 Command Reference

3.1 Operator Level 1 Commands

Lists and describes commands available in Operator Level 1.

3.2 Operator Level 2 Commands

Lists and describes commands available in Operator Level 2.

3.3 Operator Level 3 Commands

Lists and describes commands available in Operator Level 3.

3.4 Maintenance Commands (Level 4)

Lists and describes commands available in Maintenance Level 4.

3.5 Supervisor Commands (Level 5)

Lists and describes commands available in Supervisor Level 5.

Section 4 Appendices

4.1 Appendix A. Installing the Jumper for Restricted Level Access.

Details how to install a jumper to access restricted level 4 (maintenance mode).

4.2 Appendix B. CTCSS Tone and DCS Code Tables

Provides tables of CTCSS Tones and DCS Codes.

4.3 Appendix C. Programming Channel data using TDP and a PC.

Explains programming channel data using TDP software and a PC.

4.4 Appendix C. 2.5 kHz & 6.25 kHz Valid Frequencies

Lists valid frequencies for 2.5 kHz and 6.25 kHz steps.

4.5 Appendix D. Default Tables

Shows various system default parameters for memory, configuration, scan, and passwords.