What to do if my TiLite TRA AERO T Wheelchair has loose parts?
If you find any loose, worn, bent, or damaged parts during inspection, you MUST tighten, repair, or replace them before using your TiLite wheelchair.
How to maintain axles on TiLite TRA AERO T Wheelchair?
To maintain the axles on your TiLite Wheelchair, ensure they are free of dirt and lint. Wipe the axle with a cloth using either a “dry” silicone spray or a “dry” Teflon®-based lubricant.
What to do after adjustments to TiLite TRA AERO T?
After making any adjustments, repairs, or servicing to your TiLite Wheelchair, ALWAYS make sure all attachment hardware is tightened securely BEFORE using the chair.
Why is inspection important for TiLite TRA AERO T?
Failing to inspect and maintain your TiLite Wheelchair as directed puts you at risk for health complications, falls, tip-overs, or loss of control, potentially leading to serious injury or damage to the wheelchair.
How often service TiLite TRA AERO T?
You must have your TiLite wheelchair serviced and thoroughly inspected by a qualified TiLite dealer annually, or more often if necessary.
How to check axle locks on TiLite Wheelchair?
Ensure that the axle locks properly in the axle sleeve every time you remove and reinstall a rear wheel. You should verify this at least weekly on your TiLite Wheelchair.
Provides comprehensive warnings for safe operation, falling, tipping, and component considerations.
Details warnings for safe use, including handling, maneuvers, and environmental factors.
Critical safety information regarding transport in motor vehicles and wheelchair use.
Guidelines and chart for regular safety checks, inspections, and maintenance procedures.
Addresses common adjustment issues and provides solutions for wheelchair performance.
Instructions for folding and unfolding the adjustable height and angle backrest.
Instructions for swinging away, replacing, and operating swing away armrests.
Instructions for adjusting height, removing, and replacing desk arm assemblies.
Instructions for using, removing, and adjusting rigid and fold-down side guards.
Instructions for adjusting tension and replacing Velcro-style back upholstery.
General| Frame Material | Titanium |
|---|---|
| Frame Type | Rigid |
| Seat Width | 12" - 20" |
| Seat Depth | 12" - 20" |
| Custom Options | Yes |
| Folding | No |
| Adjustability | Highly adjustable |
| Wheel Size | 24", 25" |
| Front Seat Height Range | 21" |
| Rear Seat Height Range | 20" |
| Footrest Type | Adjustable |
| Caster Size | 3" - 5" |
To Next Page
