What to do if inspection uncovers any problem with TiLite Wheelchair?
If an inspection of your TiLite Wheelchair uncovers any problem, ensure you service or repair the issue before using the wheelchair.
What to do if TiLite ZR Wheelchair has loose, worn, bent or damaged parts?
If an inspection of your TiLite wheelchair reveals loose, worn, bent, or damaged parts, you must tighten, repair, or replace them before using your TiLite wheelchair.
Essential safety practices, inspections, and wheelchair handling advice.
Guidance on safe operation, including maneuvers and environmental awareness.
Details factors affecting stability and how to prevent falls or tip-overs.
Safety advice related to specific wheelchair parts and optional accessories.
Outlines regular inspections and maintenance schedules for safe operation.
Provides instructions for cleaning the wheelchair frame, upholstery, and moving parts.
Offers solutions for common wheelchair operational issues and adjustments.
Explains the optional Safe Tread for footrests to improve slip resistance.
Step-by-step instructions for adjusting the height of the footrest.
Details the procedure and tools for replacing footrests.
Explains the functionality and adjustment of folding backrests.
Step-by-step guide on how to adjust the backrest angle.
Provides instructions for adjusting the backrest height.
Instructions for mounting and removing bolt-on push handles.
Explains operation, angle adjustment, and replacement of swing-away armrests.
Covers adjustments, removal, and replacement of desk arm assemblies.
Instructions for removing and replacing cloth side guards.
Instructions for using, removing, and replacing rigid and quad removable side guards.
Instructions for using, removing, and reinstalling fold-down rigid side guards.
Instructions for mounting and adjusting adjustable fendered side guards.
Guides on adjusting tension and replacing Velcro®-style back upholstery.
Guides on adjusting tension and replacing strap-adjustable back upholstery.
Guides on adjusting tension and replacing seat sling upholstery.
Instructions for replacing the foam insert in TiLite seat cushions.
Explains how to adjust center of gravity by repositioning camber clamps.
Details the procedure and tools for replacing the camber tube.
Guides on adjusting toe-in/toe-out for rear wheels.
Instructions for adjusting and replacing quick-release axles.
Steps to adjust the operation of the quad quick-release handle.
Guides on adjusting play in quick-release axles for proper function.
Instructions for adjusting and replacing compact push-to-lock wheel locks.
Instructions for adjusting and replacing compact pull-to-lock wheel locks.
Instructions for adjusting, replacing, and reconfiguring Uni-Lock wheel locks.
Instructions for replacing casters and forks on standard forks.
Instructions for replacing casters and forks on slipstream single-sided forks.
Provides setup procedures for floating casters.
Instructions for replacing casters and elastomer shocks on Frog Legs®.
Instructions for removing and replacing quick-release axles.
Instructions for removing and replacing quad quick-release axles.
Instructions for removing and replacing pneumatic tires and tubes.
Instructions for adjusting rear wheel spacing using spacers.
Instructions for adjusting and mounting rear anti-tips.
Explains how to engage, disengage, adjust, and remove user-friendly anti-tips.
Emphasizes that transport brackets are not crash-tested and user safety protocols.
Introduces the chapter on wheelchair transport bracket option usage.
Warns against altering brackets and stresses securement for vehicle transport.
General| Frame Type | Rigid |
|---|---|
| Folding | No |
| Frame Material | Titanium |
| Seat Width | 14-20 inches (35.5-51 cm) |
| Wheel Size | 24 or 25 inches (61 or 63.5 cm) |
| Front Frame Angle | 70°, 75°, 80°, 85° |
| Caster Size | 4 or 5 inches (10 or 12.5 cm) |
To Next Page
