Page 18
T1 (default) : carriage return
T2 : line feed.
Setting an output value
Transmit the voltage or current required as an ASCII string.
EXAMPLES (HP BASIC) on the 1 volt range (R3)
OUTPUT 708;2-0.3765” !SET OUTPUT TO –0.3765 VOLTS
OUTPUT 708;”1.9” !SETS OUTPUT TO OVER-RANGE DISPLAY SHOWS
! 1….., OUTPUT SET TO APPROX 1.3 VOLTS.
OUTPUT 708;”0.0000007” !SETS OUTPUT TO ZERO, TO MANY DECIMAL
PLACES
Notes:
1. The 7th digit is always rounded to 0 or 5.
2. The output limit of any range is 1250000
To Next Page