Need help?Do you have a question about the Time Warner Cable URC-1047 and is the answer not in the manual?
Identifies the primary buttons and their layout on the URC-1047 remote control.
Details the operational functions of setup, navigation, and basic control buttons on the remote.
Explains functions for volume, channel selection, media playback, and input/source selection.
Instructions to disable channel lock for TV and VCR modes, allowing channel changes.
Instructions to re-enable channel lock for cable converter channel selection.
Steps to configure the Master Power key for sequential on/off control of multiple devices.
How to use the programmed Master Power key to control all set devices.
Procedure to reset the Master Power key programming.
Unlocks volume control for a specific device, allowing independent operation.
Sets independent volume control for all programmed devices across modes.
List of manufacturer codes for programming the remote to control DVD players.
List of manufacturer codes for programming the remote to control televisions.
Manufacturer codes for programming the remote to control TV/VCR combination units.
List of manufacturer codes for programming the remote to control VCRs and PVRs.
General| Type | Universal Remote |
|---|---|
| Brand | Time Warner Cable |
| Model Number | URC-1047 |
| Number of Devices Controlled | 4 |
| Power Source | Battery |
| Infrared Control | Yes |
| Backlit Buttons | No |
| Learning Function | No |
| Macro Function | No |
| Battery Type | AA |
| Compatible Devices | TV, DVD |
To Next Page