3) Rear derailleur support replacement.
- Loosen the 2 M3 screws with a phillips
screwdriver.
- Remove the damaged derailleur support.
- Lightly grease the supporting surface on the
frame.
- Position the new derailleur support (ref:
55003337)
- Tighten the 2 M3 phillips screws.
Nota: After a few dozen kilometers, verify that the M3 phillips screws are tight.
3) Cleaning
- Use products that are not harmful for the environment.
- Do not use a high-pressure sprayer.
- Wipe the module with a soft rag.
Warning: Do not use abrasive products as well as polish. Traces of grease can be removed by using a
solvent such as White Spirit.
To Previous Page
Loading...