Time Versalift SST-37-EIH User Manual

Operator’s Manual
Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775
Aerial Device
ATTENTION:
THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION
AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.
CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED
IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION
OF TIME MANUFACTURING CO.
DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL
YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH
OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH
VERSALIFT.
MANUAL PART NUMBER
28009-09
SERIAL NUMBER
SST-37/40-EIH
Time Manufacturing Co. reserves the right to improve the design or change specifi cations at any time without notice.
09/16
PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS
RECENTLY UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST
ADHERE TO THESE UPDATED STANDARDS.

Time Versalift SST-37-EIH Specifications

General

Brand	Time
Model	Versalift SST-37-EIH
Category	Lifting Systems
Language	English

Summary

RESPONSIBILITIES / SAFETY

RESPONSIBILITIES

Outlines duties for dealers, owners, users, operators, lessors, and lessees per ANSI/SIA A92.2.

SAFETY

Discusses operator qualifications, risks, and the importance of manuals and inspections for safe operation.

WHAT IS INSULATED AND WHAT IS NOT INSULATED

Details insulated and non-insulated sections of the aerial device's booms and structure.

SPECIFICATIONS

SST-EIH GENERAL SPECIFICATIONS

Provides a brief description of major standard components like platform, controls, leveling, and restraint systems.

SST-37-EIH DIMENSIONAL SPECIFICATIONS

Lists key dimensions, capacities, boom actions, and insulation gaps for the SST-37 model.

SST-40-EIH DIMENSIONAL SPECIFICATIONS

Lists key dimensions, capacities, boom actions, and insulation gaps for the SST-40 model.

SST-37-EIH VEHICLE SPECIFICATIONS

Details chassis mounting recommendations, platform capacities, and GVWR for the SST-37 model.

SST-40-EIH VEHICLE SPECIFICATIONS

Details chassis mounting recommendations, platform capacities, and GVWR for the SST-40 model.

OPERATION

POSITIONING THE VERSALIFT FOR OPERATION

Guides on properly positioning the aerial lift for stable and effective operation, including truck orientation.

AERIAL LIFT OPERATIONS

Covers general operating practices, start-up procedures from the ground, and considerations for cold weather.

OPERATING PROCEDURES AT THE PLATFORM

Details procedures for operating from the platform, including safety harness use and electrical hazard awareness.

OUTRIGGER OPERATION

Details the extension and retraction of outriggers for stability, including interlock features.

LOWER CONTROL OPERATION

UPPER CONTROL OPERATION

UNITROL 3 OR 4-AXIS CONTROLS

STORING THE AERIAL LIFT

EMERGENCY OPERATION

CONTROL SELECTOR (Platform Override)

HOLDING VALVES

Details how to manually lower booms using setscrews on holding valves in case of hydraulic failure.

RECOMMENDED EMERGENCY PROCEDURES

Outlines procedures for incapacitated operators and hydraulic line failures, emphasizing safety.