Time Versalift SST-40-EIH User Manual

Operator’s Manual
Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775
Aerial Device
ATTENTION:
THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION
AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.
CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED
IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION
OF TIME MANUFACTURING CO.
DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL
YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH
OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH
VERSALIFT.
MANUAL PART NUMBER
28009-09
SERIAL NUMBER
SST-37/40-EIH
Time Manufacturing Co. reserves the right to improve the design or change specifi cations at any time without notice.
09/16
PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS
RECENTLY UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST
ADHERE TO THESE UPDATED STANDARDS.

Time Versalift SST-40-EIH Specifications

General

Brand	Time
Model	Versalift SST-40-EIH
Category	Lifting Systems
Language	English

Summary

Responsibilities / Safety

Responsibilities of Dealers, Owners, Users, Operators, Lessors and Lessees

Defines the essential duties and compliance requirements for all parties involved in the aerial lift's use and maintenance.

Decals

Details the purpose and location of various safety decals affixed to the aerial lift for hazard communication.

Safety

What Is Insulated and What Is Not Insulated

Details which parts of the aerial lift are insulated and which are not, crucial for electrical safety.

Additional Safety Considerations

Operation

Positioning the Versalift for Operation

Details procedures for correctly positioning the aerial lift vehicle on-site for stable and effective operation.

Aerial Lift Operations

Covers general operating procedures, emphasizing safety and best practices for aerial lift use.

Cab Control Operation

Ground Control Operation

Lower Control Operation

Upper Control Operation

Emergency Operation

Daily Visual Inspection

Critical Fasteners

Details the inspection of critical fasteners, emphasizing their tightness and proper torque-seal marking for safety.

Critical Welds