TIMEDOX Time-Clock Silver Plus - Page 10

7. Time Card:
a. Select Card.
b. Press M/OK.
c. Hover the card in front of the
time-clock, to scan it.
d. Press the down-arrow key.
Figure 11. Scanning a card
8. Department: Avoid.
9. Purview:
Intended ONLY for system administration(s). This option locks the
access to the clock. The system administrator can be identified by a
finger-print and/or a password; however, in order to avoid a problem
when the administrator is absent, it is important that the administrator
should be identified by a finger print and a password as well:
a. Verify that the Purview box reads Administrator.
b. Define the identification by a finger-print and press M/OK (See
instruction 5).
c. Define a password and press M/OK (See instruction 6).
d. Press ESC to return to the main menu.