substitute for responsible and proper audit
supervision and not intended for use as a medical
monitor.
Please do not use power adapters that may not fit
this product configuration.
Please do not expose the baby monitor to extreme
cold, heat, wet or direct sunlight.
Make sure the baby unit and the adapter cord are
always out of reach of the baby, at least 3 feet/1
meter away from the baby or crib, to avoid a
possible strangulation hazard.
Never cover the baby unit or parent unit with
anything such as a towel or a blanket. Clean units
only when when powered off.
Troubleshooting
Problem: Power indicator light not working.
Possible cause: Does not switch on; Power is not
getting to the unit; Low batteries.
Solution: Turn on the units; Make sure the units are
connected to the power supply; Replace the
batteries.
Problem: Power indicator flashing.
Possible cause: Not connected well with adapter;
Low batteries.
Solution: Make sure well connected; Replace the
batteries.
Problem: Parent unit makes loud noises.
Possible cause: Units are too close together; Volume
dial on parent unit may be too high.
Solution: Move the parent unit at least 3 feet/1meter
To Next Page
Loading...