Timex Sinclair 2020 Computer Program Recorder - Loading and Unloading Cassette Tape; Playback

LOADING AND UNLOADING CASSETTE TAPE
1 . Open (he cassette compartment lid (10) by pressing the STOP/ EJECT button (3|,
2. Insert a cassette tape into iho compartment.
3. Close the cassette compartment lid.
4.
To
unload
the
cassette
tape, press
the
STOP/EJECT
button
f31
to
release
all
other
depressed
buttons
(4)
-
(7)
and
then
press
the
STOP/
EJECT
button
(31
to
open
the
cassette
compartment
lid
and
remove
tho
cassette
tape
with
fingertips.
PLAY BACK
1 . Load a pre-recorded cassette tape into the cassette compartment and dose the lid.
2. Start the tape by pressing |he PLAY button (5).
3. Adjust the VOLU M E control 1 1 ) to suit your listening preference.
4. To stop the taper press the STOP/EJECT button (3f.
5.
When
tho
tape
reaches
its
end
during
playback
or
recording,
it
stops
automatically
and
the
power
is
turned
off.
REWIND/REVIEW
1 . Lise REW button (6) to rewind tape.
2. While playing back or recording,, depress REW/REV button fully to rewind the cassette, and then release the button.
The recorder will continue to play or record.
6