Timex EXPEDITION WORLD TIME DIGITAL - Extended Warranty; Watch Functions Overview; Basic Operation; Chronograph

1
ENGLISH 03W-096000
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours. Payment must be made
within 30 days of purchase. Name, address, telephone number, purchase date,
and 5-digit model number required. You can also mail a check for $5 to: Timex
Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
®
watch. Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Chronograph with Split, Countdown Timer, World
Time log, Two Daily Alarms, and INDIGLO
®
night-light.
BASIC OPERATION
SET
(To save changes
and exit setting)
MODE
(Proceed to
next step)
ADJ
(Increase value. Hold
to increase rapidly.)
INDIGLO
®
BUTTON
(Decrease value.
Hold to decrease
rapidly.)
When setting, each button has a dierent function as indicated above. Watch
face will indicate when button changes function.
TIME/DATE/WORLD TIME CITY
To set time, date, and world time city
1. From Time of Day mode, press and hold SET. The world time City Code
can be seen ashing.
2. Press ADJ to advance the setting or press INDIGLO to reverse the setting.
Press and hold to increment quickly.
Note: Please refer to the World Time Table for available City Codes based on
your GMT dierence.
3. Press MODE to select DST (Daylight Saving Time) for that City Code. Press
ADJ to select/deselect DST. The “DST” symbol will light at the bottom of
the display to conrm daylight saving time is “on”.
Note: This option will only be oered for cities that observe DST. Please refer to
the World Time Table for those cities.
4. Press MODE to set Seconds. Press ADJ or INDIGLO to set Seconds to
zero adding one minute if seconds are “30” or greater.
5. Press MODE to set Hours, as indicated by its ashing. Press ADJ to
advance the setting or press INDIGLO to reverse the setting. Press and
hold to increment quickly.
6. Press MODE to set Minutes, as indicated by its ashing. Press ADJ to
advance the setting or press INDIGLO to reverse the setting. Press and
hold to increment quickly.
7. Press MODE to set the Year, as indicated by its ashing 2 digits. Press
ADJ to advance the setting or press INDIGLO to reverse the setting. Press
and hold to increment quickly.
8. Press MODE to set the Month number, as indicated by its ashing. Press
ADJ to advance the setting or press INDIGLO to reverse the setting. Press
and hold to increment quickly.
9. Press MODE to set the Date, as indicated by its ashing. Press ADJ to
advance the setting or press INDIGLO to reverse the setting. Press and
hold to increment quickly.
Note: The Day of the Week is set automatically using the Year, Month and
Date.
10. Press MODE to set the Time Format, as indicated by its ashing (12HR or
24HR). Press ADJ or INDIGLO to toggle the setting.
11. Press SET to exit Time Set.
Note: 12-Hour time has no indicator in the morning and a “PM” indicator after
Noon.
WORLD TIME TABLE
NO YESNO NO NO NO NO
NO NO NO NO NO NO NO NO NO NO NO NO NO NONO
YES YESYES YES YESYES YESYES YESYESYES
YES YES YES YES
CHRONOGRAPH
Use this function for timing events.
1. Press MODE until “SP” appears.
2. Press ADJ to start timing.
3. With the stopwatch running, press SET to record a Split time. The
stopwatch will continue timing in the background.
4. Press SET to release the display and show the current running stopwatch
time.
5. Press SET to record another Split time.
6. Press ADJ to pause the timing.
7. Either press ADJ to resume timing, or press SET to reset the stopwatch to
zero.
Note: If the stopwatch was paused when the display was showing a Split time,
the rst press of SET will show the nal recorded time, and the second press
will reset the stopwatch to zero.
SPLIT 2 = 15.01
SPLIT 3 = 22.09
SPLIT 4 = 29.39
SPLIT 1 = 7.11
COUNTOWN TIMER
Use this function for timing events or tasks that have a dened duration.
1. Press MODE until “TMR” appears.
2. To Set the Timer, press and hold SET. The Hour digit ashes.
3. Press ADJ to advance the setting or press INDIGLO to reverse the setting.
Press and hold to increment quickly.
4. Press MODE to set the Minutes as indicated by its ashing. Press ADJ to
advance the setting or press INDIGLO to reverse the setting. Press and
hold to increment quickly.
5. Press MODE to set the Seconds as indicated by its ashing. Press ADJ
to advance the setting or press INDIGLO to reverse the setting. Press and
hold to increment quickly.
6. Press SET to exit Countdown Timer Set.
7. To Use the Timer, press ADJ to start timing.
8. With the timer running, press ADJ to pause the timer.
9. With the timer paused, press ADJ to re-start it or press SET to reset the
timer to its originally set duration.
10. When the alert sounds, press ANY button to silence it, or it will stop
beeping in about 10 seconds.
11. If no button is pressed, the timer will start counting UP and continue
running for up to 24 hours. Press ADJ to pause the timer, and press SET
to reset the timer to its originally set duration.
Note: When there are 30 seconds left, a single beep will sound. With 10
seconds left, the watch will beep every second as it counts down.