Sleeping to Radio or Nature Sounds with Timer
Sleeping to the Radio with Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
1.Press the Radio On/Sleep Button twice to enter the sleep mode.
2.Continue pressing the Radio On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time. When
the display shows the desired sleep time, stop pressing the button. The sleep timer setting remains active
for approximately ten seconds before returning to the standard clock display. The Sleep Volume Indicator
will appear, showing that the radio timer has been activated.
3. Select a radio station using the AM/FM Band Button and either the Memory Set 1-6 Buttons or
the Reverse / Forward Tuning Buttons.
4.Press the Sleep Volume Button to adjust the sleep volume to a comfortable level without affecting the
alarm volume. The Sleep Volume Indicator will show the current sleep volume level. Turning the Volume
Thumbwheel will also adjust the sleep volume, though this will also change the alarm volume.
5.The radio will play for the programmed sleep time and then shut off. To check how much sleep time is
remaining, press the Radio On/Sleep Button once.
6. To turn off the radio before the sleep time has elapsed, press the
Off/Reset Button.
Sleeping to Nature Sounds with Timer
1. Press the Nature Sounds Button twice to enter the sleep sounds mode. This sets the sleep timer to
the 90-minute setting. The sleep timer setting remains in the display for approximately ten seconds before
returning to the standard display. The Nature Sounds Indicator will be visible in the LCD display.
2. Continue pressing the Nature Sounds Button to select a 90-, 60-, 30-, or 15-minute sleep timer.
3. Press the Reverse / Forward Tuning Buttons to select one of the four nature sounds.
4. Press the Sleep Volume Button to find a comfortable sleep volume. The Sleep Volume Indicator will
show the current sleep volume level. Adjusting the sleep volume in this way will not affect the alarm volume.
5. To turn off the nature sounds before the sleep time has elapsed, press the
Off/Reset Button.
Note: To see the number of minutes remaining on the sleep timer, press the Nature Sounds Button once.
The display will show the Sleep Timer for approximately ten seconds before returning to the normal mode.
9
To Next Page
Loading...
Need help?
General
