3. Adjusting the Height
Press or button until the desk reaches the preferred height.
4. Setting the Memorized Position
TDH18P supports a maximum of 2 memory positions.
How to memorize a position:
1. Adjust the desk to the desired height.
2. Press the preferred memory button (1 or 2), with either or for 2 seconds. Once the display shows
P1 or P2, the position is memorized.
3. Press (and hold) button 1 or 2 to move the desk to the memorized position. (Note 1)
Note 1: It depends on the control box setting whether or not the memory button needs to be held.
To Next Page
Loading...
