6. Presetting the Desk Starting Height
(1) Press button until the desk reaches its lowest position and then release button. Re-press
button again for 5 seconds and the digital display will flash for 10 seconds.
(2) Adjust the starting height number with the or button.
(3) After 10 seconds, the display will stop flashing and this will confirm that you have successfully set the
starting height.
7. Lock / Unlock
(1) Lock: Press the “lock” button for one second or do not touch any buttons for 20 seconds, then the image
will be shown on the display to indicate that the lock was completed successfully (as below image).
(2) Unlock: Hold the “lock” button for 3 seconds to unlock the hand control.
To Next Page
Loading...
