EN
13
Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the iLoop sensor automatically detects
how dirty the oor is and applies the appropriate amount of
detergent and suction power.
• A red dirt monitoring loop indicates more dirt is detected,
and a blue loop indicates less dirt is detected. This mode
automatically provides the best cleaning solution.
MAX Mode
• In AUTO mode, press the button to enter MAX mode.
The AUTO indicator on the display will turn off.
• In MAX mode, the appliance will apply max suction power
and will spray water/solution for deeper cleaning.
SUCTION Mode (only available in selected models)
• In MAX mode, press the button to enter SUCTION mode.
• In SUCTION mode, the appliance will only absorb water and
do not spray. We recommend using this mode on the wet
surface.
Note:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.
To Next Page
Loading...
Need help?
General
