EN
11
OVERVIEW
Note:
Accessories may vary between markets. If you
require more accessories, please go to
www.tineco.com or store.tineco.com.
1
Water Spray Trigger
2 Back Carry Handle
3 Cord Wrap
4 Dirty Water Tank Release Pedal
5 Recline Pedal
6 ECO/MAX/DRY Mode
7 Power On/Off
8 Tube
9 Digital Display
10 Clean Water Tank Handle
11 Clean Water Tank (CWT)
12 Dirty Water Tank Handle
13 Dirty Water Tank (DWT)
14 Brush Roller Cover Release Button
15 Hose Connection Port Cover
16 Brush Roller Cover
17 Carpet Deodorizing & Cleaning Solution
18 Cleaning Tool
19 2 in 1 Nozzle
20 Sponge Filter
21 Brush Cover Scraper
22 Accessory Hose
23 ECO Mode
24 DWT Full or Blocked
25 CWT Empty
26 Tineco Logo
27 MAX Mode
28 Brush Roller Tangled Indicator
29 Dry Mode
Fig.A
ASSEMBLY
How to Assemble/Disassemble
• To assemble the handle, insert it into the
appliance until you hear a click.
Fig.B-1
• In the event that the handle need to be
disassembled, press the spring to release the
handle with a tool (like a screwdriver) and lift
the released handle from the appliance.
Fig.B-2
• Wrap the power cord around the cord hooks
for convenient storage.
Fig.B-3
Clean Water Tank
• Press the CWT handle to remove it.
Fig.B-4
• Open the tank cap, add two bottle caps of
solution to the CWT then ll with tap water to
the Max line and tightly close the cap.
Fig.B-5
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
• Install the Clean Water Tank into the appliance.
You should hear a “Click” if done correctly.
Fig.B-6
Dirty Water Tank
• Install the Dirty Water Tank into the appliance.
You should hear a “Click” if done correctly.
Fig.B-7
Accessory Hose & 2 in 1 Nozzle
• Choose suitable brush head according to the
usage scenario.
Fig.B-8
• Pull it up to uncover the accessory connection
port.
Fig.B-9
• Insert the hose end into the port. You should
hear two “Clicks” if done correctly.
Fig.B-10
To Next Page
Loading...
Need help?
General
