10
Wall-mounted Dock Installation
120 cm
click
Determine the best wall location for mounting
the dock. We recommend placing it 120cm
from the lower screw hole to the oor (may
need to be adjusted based on the actual
situation).
Assemble the two bracket components, with a
“click” to signify correct assembly. Once this is
complete, use the screws provided by Tineco to
afx the dock to the wall.
Warning:
• Ensure the wall surrounding the mounting area is free of gas, water pipes, electrical cables and wires.
• To avoid the dock falling, ensure it is rmly installed.
To Next Page
Loading...
