What to do if the Tineco Washer dirty water tank is full?
If the dirty water in the Dirty Water Tank (DWT) of your Tineco Washer has reached the MAX line, empty the dirty water and then reinstall the DWT.
What to do if the Tineco Washer clean water tank is empty?
If the Clean Water Tank (CWT) of your Tineco Washer is empty, refill it.
Why my Tineco FLOOR ONE S7 PRO Vacuum Cleaner does not turn on?
If your Tineco Vacuum Cleaner does not turn on, it could be due to a couple of reasons: * No power: Charge the appliance. * Auto protection: Restart after cooling down.
What to do if my Tineco FLOOR ONE S7 PRO Vacuum Cleaner says 'Battery low'?
If the battery level is low on your Tineco Vacuum Cleaner, the appliance may need charging. Charge the appliance, or restart it.
How to fix weak suction on a Tineco FLOOR ONE S7 PRO?
If you are experiencing weak suction with your Tineco Vacuum Cleaner, ensure the dry filter is installed correctly and is clean. If the dry filter is dirty, clean it and allow it to dry completely before reinstalling.
What to do if the Tineco Washer brush roller is tangled?
If the brush roller of your Tineco Washer is tangled, it could be blocked or not installed correctly. First, remove any blockages from the brush roller. If that doesn't resolve the issue, ensure the brush roller is correctly installed.
What to do if my Tineco Washer won't turn on?
If your Tineco Washer does not turn on, it could be due to no power or auto protection for overheating. First, charge the appliance. If it still doesn't turn on, allow it to cool down and then restart it.
Why is the suction weak on my Tineco Washer?
Weak suction on your Tineco Washer could be because the dry filter is not installed, or the dry filter is dirty. Install the dry filter or clean it and allow it to dry completely.
What to do if all lights are off on my Tineco Washer?
If all the lights are off on your Tineco Washer during operation, it could be due to battery overheat or malfunction. Cool the appliance down and restart it.
What to do if my Tineco Washer LCD loop illuminates red?
If the LCD loop on your Tineco Washer illuminates red, it indicates a dirt sensor malfunction or blockage. Remove any blockages, clean the debris channel, or restart the appliance.
General| Type | Cordless Wet/Dry Vacuum Cleaner |
|---|---|
| Battery Life | Up to 40 minutes |
| Charging Time | 4-5 hours |
| Self-Cleaning | Yes |
| Smart Display | Yes |
| Voice Prompts | Yes |
| Weight | 5.5 kg |
| Filtration System | HEPA Filter |
| Auto Mode Adjustment | Yes |
Statement regarding the appliance's compliance with FCC radiation limits.
Information about the cleaning solution for stain removal.
Details on the soft roller head for vacuuming and washing.
Explanation of the dry filter and filter net function.
Description of the tool for cleaning DWT, brush chamber, and roller.
Instructions on how to assemble and disassemble the appliance.
Steps required before using the appliance for the first time.
Brief introduction to buttons and appliance usage.
Tutorial for operations like filling tanks and cleaning.
Explanation of the functions of the menu button.
How to control voice prompts and language settings.
Guidance on how to charge the appliance.
Overview of different cleaning modes available for the appliance.
Details on automatic mode with iLoop sensor.
Information on using MAX mode for embedded stains.
Explanation of ULTRA mode for deep cleaning.
Instructions for cleaning and maintaining the main part of the appliance.
Steps for cleaning and maintaining the dirty water tank lid.
Instructions for cleaning and replacing the dry filter.
How to remove and reinstall the brush roller cover.
Details of the appliance's 2-year limited warranty coverage.
Specifies what aspects of the appliance are covered by the warranty.
Lists exclusions and limitations of the warranty.
To Next Page