What to do if I get a 'battery low' voice prompt on my Tineco FLOOR ONE S7?
If your Tineco Vacuum Cleaner displays a low battery voice prompt, it means the battery level is below 10%. To fix this, charge the appliance or restart it.
Why my Tineco FLOOR ONE S7 Vacuum Cleaner does not turn on?
If your Tineco Vacuum Cleaner does not turn on, it could be due to a couple of reasons. First, check if it has power and charge it if necessary. Second, it might have auto protection activated due to overheating; in this case, allow it to cool down before restarting.
How to fix weak suction on a Tineco FLOOR ONE S7?
If you're experiencing weak suction with your Tineco Vacuum Cleaner, it might be because the dry filter is either not installed or is dirty. Install the dry filter, or clean it and allow it to dry completely before reinstalling.
What to do if the DWT (Dirty Water Tank) is full in my Tineco FLOOR ONE S7 Vacuum Cleaner?
If the Dirty Water Tank (DWT) is full in your Tineco Vacuum Cleaner, it means the dirty water has reached the maximum line. To resolve this, empty the dirty water from the DWT and then reinstall it.
What does it mean when the LCD loop illuminates red on my Tineco Vacuum Cleaner?
If the LCD loop illuminates red and you hear a voice prompt to perform self-cleaning on your Tineco Vacuum Cleaner, it indicates a dirt sensor malfunction or blockage. Try removing any blockages, clean the debris channel, and then restart the appliance.
What to do if the brush roller is tangled in my Tineco FLOOR ONE S7?
If the brush roller of your Tineco Vacuum Cleaner is tangled, it's likely blocked or not installed correctly. Remove any blockages from the brush roller or ensure it is correctly installed.
Why are all the lights off on my Tineco Vacuum Cleaner during operation?
If all lights are off during operation of your Tineco Vacuum Cleaner, it suggests the battery may be overheating or malfunctioning. Cool the appliance down and then restart it.
What to do if the CWT (Clean Water Tank) is empty in my Tineco FLOOR ONE S7?
If the Clean Water Tank (CWT) is empty in your Tineco Vacuum Cleaner, you'll receive a voice prompt indicating insufficient water. Refill the CWT to continue using the appliance.
Why is the WiFi indicator off on my Tineco FLOOR ONE S7?
If the WiFi indicator is off on your Tineco Vacuum Cleaner, it means that the WiFi is not connected. To resolve this, follow the in-app guide to connect to WiFi.
General| Type | Cordless Wet/Dry Vacuum Cleaner |
|---|---|
| Self-Cleaning System | Yes |
| HEPA Filtration | Yes |
| Smart Display | Yes |
| Voice Prompts | Yes |
| Charging Time | 4 hours |
| Dustbin Capacity | Not applicable |
| Noise Level | ≤78 dB |
Instructions for preparing the appliance before its initial use, including charging and setup.
Covers Quick Start Guide, Interactive Tutorial, Menu Button, and WiFi/Mute/Language controls.
Instructions for cleaning the main body of the appliance using a damp cloth and neutral detergent.
To Next Page