13
Digital Display
An updated display shows everything with interactive animation, giving you a brand new experience
during and after cleaning.
Note:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.
Cleaning Mode Selection
AUTO Mode
• In AUTO mode, the iLoop sensor automatically detects
how dirty the oor is and applies the appropriate amount of
detergent and suction power.
• A red dirt monitoring loop indicates more dirt is detected,
and a blue loop indicates less dirt is detected. This mode
automatically provides the best cleaning solution.
MAX Mode
• Press the left or right Select button to enter MAX mode.
• In MAX mode, the appliance will apply max suction power
and will spray water/solution for embedded stains.
ULTRA Mode
• Press the left or right Select button to enter ULTRA mode.
• In ULTRA mode, the appliance will prepare for 30 seconds and
then start to work. This mode is suitable for deep cleaning.
To Next Page
Loading...
