12
Filling Clean Water Tank
MAX
Press the Clean Water Tank release button
to remove it from the appliance.
Open the tank cap, and ll with tap water to the
Max line. When deep cleaning is necessary, add one
bottle cap of solution to the CWT and tightly close
the cap.
②
①
click
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
Place the tank back into the appliance. You
should hear a “Click” if done correctly.
Charging Instructions
To charge the appliance, place the appliance on the
charging base and plug the adaptor into a power
outlet.
1. To charge the appliance, connect the external
charging cord to the charging base and plug it into
the wall outlet.
2. To avoid tripping hazards, please place the
appliance on the charging base near a wall during
charging.
Warning:
• Only charge the appliance with the adaptor supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for
optimal performance. It may take 4-5 hours for a full charge.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
To Next Page
Loading...
Need help?
General
