Tineco FLOOR ONE S7 Series User Manual

18
Brush Roller Self-cleaning
1. Place the appliance on the charging base after use, the
sensor will auto-detect the level of dirt.
2. Press the self-cleaning button and you can select the
Quick Self-cleaning (takes 2 minutes) or Super Self-
cleaning (takes 6 minutes) to begin the process.
3. Once complete, please clean the Dirty Water Tank.
And the appliance will begin charging.
Note:
• Ensure the charging base is plugged in and the battery
level 20%.
• Before self-cleaning cycle, please clean the DWT and
ensure the water level in the CWT exceeds 40%.
Brush Roller Cover
②
①
Squeeze latches on the cover and pull upward to
remove.
Rinse with water.
When replacing, always latch the brush cover into
place to avoid leakage.
click

Tineco FLOOR ONE S7 Series Specifications

General

Type	Cordless Wet/Dry Vacuum Cleaner
Self-Cleaning System	Yes
HEPA Filtration	Yes
Smart Display	Yes
Voice Prompts	Yes
Charging Time	4 hours
Dustbin Capacity	Not applicable
Noise Level	≤78 dB