Tineco FLOOR ONE S7 Series User Manual

19
Brush Roller
Remove the brush roller by grabbing the
brush roller tab and pulling out.
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Remove hair and debris from the brush roller
chamber and the opening with the cleaning
tool.
Replace the brush roller by inserting its end into
the left side of the holder, then attach the roller
tab to the magnetic buckle on the right side to
lock into place.
Note:
• A spare brush roller is provided with your appliance for convenient replacement.
• To maintain high performance, replace the brush roller every 8 months or when brush roller is dirty.

Tineco FLOOR ONE S7 Series Specifications

General

Type	Cordless Wet/Dry Vacuum Cleaner
Self-Cleaning System	Yes
HEPA Filtration	Yes
Smart Display	Yes
Voice Prompts	Yes
Charging Time	4 hours
Dustbin Capacity	Not applicable
Noise Level	≤78 dB