17
Pre-lter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-lter from
the mesh lter-holder.
Do not turn the appliance upside down when
removing or installing the lter to prevent dust
from entering the motor.
Replace a clean lter to the main body. Put
the dirty pre-lter into the cleaning tool and
connect the cleaning tool to the main body.
Run the appliance in MAX mode, and rotate the
side cover to clean the dirty pre-lter.
HEPA Filter
Turn the HEPA to the left and gently pull out
for cleaning. Do not use the appliance without
rst installing the HEPA lter.
Do not place the appliance as above when
removing or installing the HEPA lter, to prevent
dust from entering the motor.