25
black box and insert the other end of the
cable to the car stereo head unit FM antenna
socket.
7. You may also choose line out to the car
stereo head unit by connecting the supplied
3.5mm audio cable to the Audio Out socket
in the black box and the other end to the
line-in of the car stereo head unit.
8. When the power of the black box is ON, the
OLED display will show “Tiny Audio C11+”.
Press and hold the 4/M button to enter
menu mode.
9. For first time use, you need to scan all the
local DAB+ channels by activating the Auto
Scan in the menu by press and hold 4/M
button to enter main menu, use “>” or “<”
button to search for Auto Scan and
confirmed by pressing 1/E button to scan. All
available DAB+ radio channels will be
scanned and saved until another Auto Scan is
performed. During scanning, a percentage
bar will be shown on the display to indicate
To Next Page
Loading...
