24
Installation and Operation of the Tiny
Audio C11
+
1. Install the Tiny Audio C11+ inside the glove
box using the provided cables.
2. Insert the power supply cable connector (5)
to the power supply socket in the black box
and connect the other end of the cable to
the +12V VCC car power supply with correct
wiring as indicate in the wire label.
3. Connect the supplied antenna (6) to the
DAB+ antenna socket in the black box.
4. Connect the control unit cable (4) to the
control unit connector in the black box.
5. Disassemble the existing car AM/FM antenna
and insert it into the FM-IN socket in the
black box,
6. Screw one end of the supplied FM antenna
out cable (2) to the FM-Out socket in the
To Next Page
Loading...
