27
1. The DAB+ antenna (6) should be fitted on the
passenger side of the front windscreen with
vertical direction as indicated in the above
diagram. The antenna can be hide inside
the A-pillar.
2. The antenna can be fixed to the metal of
A-pillar by using adhesive tape.
3. Route the antenna lead down the A pillar to
where the Tiny Audio C11+ is to be mounted.
Ensure you do not trap any leads as you go.
Do not attach the DAB antenna above heater
wires, in a location which would obstruct the view
of the driver, or in a location that would receive
interference from metal. For your safety, do not
run cables so that they interfere with operation of
the vehicle, or through a location that would
interfere with the function of the airbags.
To Next Page
Loading...
